Epluser Co.,Limited
Categories

    Company:Epluser Co.,Limited

    Customer Service: 86-755-86652783

    Contact Address: 408, 4 Floor, C Area, B Block, West Silicon Valley, 5010 Bao'An Blvd, Bao'An, ShenZhen, GuangDong,518128, China

    Email: sales@eplastech.com

Home > Knowledge > Content

The correct plastic mold maintenance

Epluser Co.,Limited | Updated: Sep 25, 2015

Before, production tool maintenance

A, to the mold surface oil, clean up the rust check for foreign bodies casting cooling holes, if water doesn't make sense.

B, need to check whether the mold rubber sleeve arc damage, whether there are residual foreign body. the moving parts are normal, action is smooth.

Second, the production of tool maintenance

1 check per day, all of the Guide pillar and guide bushing damage, including pillar. lines and other components, the refueling and maintenance on a regular basis, twice-daily maintenance.

2, cleaning mold parting line filaments and exhausting-slot of foreign bodies, foreign body, oil and check for mold ejector pins are an exception and Polish on a regular basis. Parting surface, runner surface cleaned twice a day. Guide tips, bushings, oil daily of a location shoot.

3, periodically check the water is smooth, and all fastening screws are fastened.

4, check the limit switch is abnormal, with oblique PIN. the lifter is abnormal.

Three, stop-tool maintenance

1, down road must be closed before cooling water, sea water blowing off the mold, check whether residues of glue on the surface of silk, foreign body, such as rust on a uniform spray to clean up after them, fill in related records.


Contact Us
Address: 408, 4 Floor, C Area, B Block, West Silicon Valley, 5010 Bao'An Blvd, Bao'An, ShenZhen, GuangDong,518128, China
Tel: +86-755-86652783
 Fax:86-755-82976995
 E-mail:sales@eplastech.com