Epluser Co.,Limited
Categories

    Company:Epluser Co.,Limited

    Customer Service: 86-755-86652783

    Contact Address: 408, 4 Floor, C Area, B Block, West Silicon Valley, 5010 Bao'An Blvd, Bao'An, ShenZhen, GuangDong,518128, China

    Email: sales@eplastech.com

Home > Knowledge > Content

On the application of plastic mould hot runner technology

Epluser Co.,Limited | Updated: Sep 25, 2015

Advantages and disadvantages of using hot runner technology:

Advantage 1, shortening the molding cycle

Because there is no gating system of cooling time limits and molding curing to top out in time. Many hot runner mold production of thin-wall part molding cycle in 5 seconds or less.

2, save the plastic raw materials

Not cold in the pure hot runner mold gate, so no production costs. This application for plastic more expensive projects is particularly significant. In fact, the major international manufacturer of hot runner in the world oil and plastic material era has seen rapid development of expensive. Hot runner technology is to reduce the cost effective way to reduce material costs.

Expand the application of injection molding process fan Wei

Many advanced plastic molding technology was developed on the basis of hot runner technology. PET preform making, multicolor injection in a mold, a variety of materials technology, STACK MOLD.

Disadvantages:

1 mold costs

Hot runner components more expensive, hot runner tooling costs can be greatly increased. If small parts production, mould tool cost ratio is high, do not spend is on the economic. Die user in many developing countries, price of your hot runner system is the hot runner molds are widely used by one of the main problems.

2, high hot runner mold production process and equipment requirements

Hot runner molds require precision processing machines as a guarantee. Hot runner system and demanding integration and collaboration of die or mould serious problems will arise during the production process. Bad plastic seal hot runner components cause damage to the plastic overflow interrupt production, nozzle inserts and relative position of the gate well led to serious decline in quality of products and so on.


Contact Us
Address: 408, 4 Floor, C Area, B Block, West Silicon Valley, 5010 Bao'An Blvd, Bao'An, ShenZhen, GuangDong,518128, China
Tel: +86-755-86652783
 Fax:86-755-82976995
 E-mail:sales@eplastech.com