Epluser Co.,Limited
Categories

    Company:Epluser Co.,Limited

    Customer Service: 86-755-86652783

    Contact Address: 408, 4 Floor, C Area, B Block, West Silicon Valley, 5010 Bao'An Blvd, Bao'An, ShenZhen, GuangDong,518128, China

    Email: sales@eplastech.com

Home > Knowledge > Content

Mold design of materials determines the success of the quality of the product

Epluser Co.,Limited | Updated: Sep 25, 2015

Injection molding in plastic filler gases are generally in the process by setting the exhaust system (mainly air vent) excluded; at the time of release, some large smooth module to set the bleed air system to release. If ventilation steel there is this kind of porous metal can be installed in the appropriate location on the cavity wall, so that gas directly from the metal penetrates in the body, without the need to specifically set the exhaust, the bleed air system, making plastic molds also have good exhaust suction function.

Breathable plastic mould industry mold plastic mold steels used can effectively solve problems in industry, improve production efficiency and product competitiveness, has good prospects for industrial applications. Major in:

1) reduce the injection pressure, reduce the dwell time;

2) increase the mold parting line of tight fit, improving the top and tie in the performance of the Insert, without the use of a parting surface or other exhaust system, avoid waste generation;

3) but due to the gate and wall thickness unevenness, thin-walled products difficult molding problems are solved and mitigation.

Breathable synthetic metal mold well, and is widely used in industrial practice, this technology solves many of the technical requirements of the product, makes the product more precise and better performance. Through the analysis of mould market in China, enterprises should increase the technical innovations, the introduction of foreign advanced technology, go to die the most cutting-edge.


Contact Us
Address: 408, 4 Floor, C Area, B Block, West Silicon Valley, 5010 Bao'An Blvd, Bao'An, ShenZhen, GuangDong,518128, China
Tel: +86-755-86652783
 Fax:86-755-82976995
 E-mail:sales@eplastech.com